Filter
Top Products
Ref : MA_WILDCAT_FR Issued by : Alban ROSSOLLIN Date : mars 2010 Up-date : 3 Page 24/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Copyright HCE 2010
4. Installation of spreader cables
Unroll the spreader cables.
Take the left cable and insert it into the slot at the base of the mast.
bring it out of the bottom of the mast and screw to the base of the mast foot.
Leave the other end on hold.
Take the right adjustable cable, unscrew the bottom part and repeat the
same operations as for the first cable only this time on the right side.
The two cable are now screwed to the base of the mast foot.
Now just put the mast foot into the mast base.
…/…
Preparin
g
the mast