Filter
Top Products
Ref : MA_WILDCAT_FR Issued by : Alban ROSSOLLIN Date : mars 2010 Up-date : 3 Page 33/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Copyright HCE 2010
1. Installing the spi pole
Connect the pole to the front crossbar
using the pin and split ring.
Attach the front bridles and make sure the the pulley at the
end of the pole is facing upwards towards the sky.
Put on the central tension rope without tightening for the
time being. It will need to be tightened after the tension has
been put on the shrouds and it has been determined which
hole for the forestay.
…/…
Spinnaker kit assembly