Filter
Top Products
Ref : MA_WILDCAT_FR Issued by : Alban ROSSOLLIN Date : mars 2010 Up-date : 3 Page 35/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Copyright HCE 2010
3. Spinnaker halyard circuit.
Pick up the spinnaker halyard that was left
waiting on the halyard cleat of the mast.
Follow the diagram for the halyard circuit :
Take the spinnaker halyard down from the
cleat on the front crossbar then, iinto the pulley
near to the rear crossbar. After, take it through
the pulley on the trampoline and under the
trampoline,through the sock and out of the
trumpet. Fix it on to the spi pole for the
moment.
4. Spinnaker tack
Take the spinnaker tack line which is fixed
under the front crossbar and pass through the
pulley at the front of the boom, tie a knot while
waiting to fix it to the spinnaker.
Spinnaker kit assembly