Filter
Top Products
Ref : MA_WILDCAT_FR Issued by : Alban ROSSOLLIN Date : mars 2010 Up-date : 3 Page 25/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Copyright HCE 2010
Attach the left cable to the fitting situated on the left-hand side above the
spreaders.
Slip the spreader into the corresponding slot of the left spreader, taking
care that the black plastic disk is above the spreader.
Repeat the same for the right cable, being careful to screw the two parts of
cable together.
Adjust the tension with the help of the adjusting screw on the right spreader
cable to straighten the mast.
Once that the mast is completely straight, put tension on the two cables
under the mast foot with a spanner.
…/…
Preparin
g
the mast