Filter
Top Products
Ref : MA_WILDCAT_FR Issued by : Alban ROSSOLLIN Date : mars 2010 Up-date : 3 Page 41/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Copyright HCE 2010
4. Once that the jib is hoisted, replace the
yellow halyard by the jib Cunningham
rope (B).
5. Pass through the eye, then into the
pulley that comes out of the jib zip (in
the place of the yellow halyard) back
down and tie a knot on the large
shackle.
6. Take the end of the cunningham line
and pass it through the pulley attached
at the fixing point of the left bridle.
Attach to the end a small pulley.
7. Take the Cunningham rope A from the
rope bag. Attach one end on the
martingale under the hull. Pass the
other end through the pulley and back
to the cleat on the front crossbar.
…/…
Ri
gg
in
g
the boat : Jib