Filter
Top Products
7. Assembling the Transducer Mounting Bracket
Inthisprocedureyouwillassemblethe portable transducer mountingbracket.
1. Lineupthetworatchetpiecesatposition1sothatthebeadsarealigned
with the rib on the transducer.See illustrations.
2. Assemble the other transducer parts as shown (see the illustration
Assembling the Portable Bracket below).Hand tighten only!
NOTE:Ifyouareunabletoratchetthetransducersothatitrestsbelowthewaterand
points straight down, you can disassemble it and align the beads with a different
number until you reacha position that allows theproper alignment.
Assembling thePortable Bracket
SuctionCup
PortableTransducer
Assembly
PhillipsHead
Screw
Washer
WingNut
Bolt
Ratchet
TransducerKnuckle Positions
Knuckle
Ratchets Placedin Position 1
Ribat
position1
Beads
Ratchet
10