Filter
Top Products
3. Using a socket wrench and a Phillips screwdriver, secure the
PiranhaMAX™ mount to the base with the four included 3/4” screws,
lock washers,andnuts. Hand tighten only!
4. Install the handle onto the base, so that the curved part of the handle
faces towards the back of the base, towards the battery well. Use the
four included #8-32 x 7/16" screws, two on each side, to attach the
handletothebase(seetheillustrationsInstallingtheHandleOntothe
Base and Sliding in the Handle).Hand tighten only!
NOTE: Thehandle iskeyedso that it only fits onto the base in one direction.
Attaching theMount to the Base
PiranhaMAX™Mount
(tiltOR tilt andswivel)
Base
Sliding in theHandle
Installing theHandle Onto the Base
3