Filter
Top Products
93
Lat/Lon Grid
Settings: Hidden, Visible; Default = Hidden
Lat/Lon Grid allows you to display or hide a grid showing latitude and longitude
lines.
Spot Soundings
Settings: Hidden, Visible; Default = Hidden
Spot Soundings allows you to display or hide spot soundings, which are depth
measurements shown on the chart.
NOTE: Spot Soundings are only available with optional-purchase MMC/SD cards.
Chart Select
Settings: Various, Default = Auto
Chart Select allows you to choose which chart to use if you have built-in charts
or a map card. If you select Auto, you unit will select a chart automatically.
Set Simulation Position
(Advanced)
Settings: Follow screen instructions to activate.
Set Simulation Position allows you to set the position of the boat used in the
Simulator. Press any arrow on the 4-WAY Cursor Control key to activate the
cursor and move it to the coordinates where you want start the simulation.
Then confirm the position using the Set Simulation menu setting.
NOTE: The cursor must be active in order for this procedure to work. If the cursor was
not active before you began this procedure, an error message will appear. Exit the
menu, set the cursor, then try again.
Chart Menu Tab