Filter
Top Products
18
Display the Waypoints Submenu: From any view, press the MENU key twice to display
the Main Menu System, then use the RIGHT Cursor key to select the Navigation tab.
Select Waypoints and press the RIGHT Cursor key to display the Waypoints submenu.
Program a specific position as a waypoint: To create a waypoint that is NOT your
current position, from the Waypoints submenu, select the Create option and press
the RIGHT Cursor key. Use the Cursor keys to program a waypoint name, latitude,
longitude, and icon before selecting Save.
Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT
Cursor key to display a list of saved waypoints. Select the waypoint you want to edit
by pressing the RIGHT Cursor key. Use the RIGHT and LEFT Cursor keys to move from
field to field, and the UP and DOWN Cursor keys to changes values once you are in a
field. In the Waypoint Name, Latitude and Longitude fields, the UP and DOWN
Cursor keys change the letter or number. All upper and lower case letters are
available, as well as digits 0-9 and some punctuation characters. In the Waypoint
Icon field, the UP and DOWN Cursor keys change the icon used to represent the
waypoint on the Combo and Chart Views. You can exit these fields with the LEFT and
RIGHT Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT
Cursor key to save your changes.
To make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT
Cursor keys to select a sort order:
• Name shows the waypoints alphabetically
• Time shows the most recently-created waypoint first
• Distance shows the closest waypoint first.
Delete a waypoint: From the Waypoints submenu, select Delete and press the
RIGHT Cursor key to display a list of waypoints. Select the waypoint you want to
delete, then press the RIGHT Cursor key. You will be asked to confirm deletion before
the waypoint is actually deleted.
Na
Na
vig
vig
a
a
t
t
e t
e t
o a W
o a W
a
a
ypoin
ypoin
t or P
t or P
osition
osition
Navigate to the cursor position: From the Combo or Track view, use the Cursor key
to select a position or waypoint to which you want to navigate. Press the GOTO key.
Navigation will begin immediately.
Navigate to a specified waypoint: Press the GOTO key, then choose the waypoint to
which you would like to navigate from the waypoint list and press the RIGHT Cursor
key to select it.
From any view, you can also navigate to a waypoint using the GOTO key.
NOTE: By repeating the previous instructions, you can add more waypoints to create a
longer route.
Skipping a waypoint: From the Navigation X-Press
TM
menu, select Skip Next
Waypoint and press the RIGHT Cursor key. If there is not another waypoint to skip to,
navigation will be cancelled.
Cancel navigation: From the Navigation X-Press
TM
menu, select Cancel Navigation
and press the RIGHT Cursor key. Canceling navigation removes the route and any
waypoints created using the GOTO key.
Add a W
Add a W
a
a
ypoin
ypoin
t T
t T
ar
ar
g
g
et or T
et or T
r
r
olling Grid
olling Grid
Add or Remove a Waypoint Target: From the
Waypoints submenu, select Target and press the
RIGHT Cursor key. A target consisting of concentric
circles centered on the selected waypoint will
appear on all of the navigation views; the target
shows various distance ranges from the targeted
waypoint. To remove the target, choose Remove
Target from the Navigation X-Press
TM
menu.
Chart View with Target
19
M5565_ManE_531192-1_A.qxd 5/4/2003 9:39 PM Page 22