Filter
Top Products
20
Add or Remove a Trolling Grid: From the
Waypoints submenu, select Grid and press the
RIGHT Cursor key to add the grid to the selected
waypoint. The trolling grid will appear on all of
the navigation views, and can be used as a guide
when trolling around a waypoint. The grid can be
rotated to any desired heading using Grid
Rotation from the Navigation Main menu. To
remove the trolling grid, choose Remove Grid
from the Navigation X-Press
TM
menu.
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a
target or a grid to a new waypoint, the original waypoint will lose its target or grid.
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines
on the trolling grid is the same as the length of the scale bar on the left edge of the
display. Zooming in or out will decrease or increase the spacing, respectively.
Sa
Sa
v
v
e, Edit or Delet
e, Edit or Delet
e a R
e a R
out
out
e
e
Save the current route: While you are navigating, the current route can be saved.
From the Navigation X-Press
TM
menu, select Save Current Route and press the RIGHT
Cursor key. Navigation will continue.
Display the Routes submenu: From any view, press the MENU key twice to display
the Main Menu System, then use the RIGHT Cursor key to select the Navigation tab.
Select Routes and press the RIGHT Cursor key to display the Routes submenu.
Create a route: From the Routes submenu, select Create and press the RIGHT Cursor
key. A Route Edit screen will be displayed with an empty route. You can name the
route, add waypoints to the route from the list of all waypoints, and order the
waypoints in the route using the Cursor keys.
Edit a saved route: From the Routes submenu, select Edit and press the RIGHT Cursor
key. A Route Edit screen will be displayed. Select the route you wish to edit and press
the RIGHT Cursor key. Change or delete the waypoints used in the route.
Chart View with Grid
Delete a saved route: From the Routes submenu, select Delete and press the RIGHT
Cursor key. A Route Edit screen will be displayed. Select the route you wish to delete
and press the RIGHT Cursor key. You will be asked to confirm your choice by pressing
the RIGHT Cursor key again before the route is deleted.
Travel a saved route: From the Routes submenu, select Travel and press the RIGHT
Cursor key. A list of saved routes will appear. Select the route you wish to travel
and press the RIGHT Cursor key to make this route the current route and
begin navigation.
Route Info: From the Routes submenu, select Info and press the RIGHT Cursor key. A
list of saved routes will appear. Select the route for which you want information, and
press the RIGHT Cursor key. The list of waypoints in the route will be shown, with the
distance and bearing from each waypoint to the next, as well as the distance and
bearing from the current position to the first waypoint in the route.
Sa
Sa
v
v
e or Clear a C
e or Clear a C
urr
urr
en
en
t T
t T
r
r
ac
ac
k
k
Save the current track: From the Navigation X-Press
TM
menu, select Save Current
Track and press the RIGHT Cursor key. The track will remain on the display, but
will change from black to gray. To remove the track completely from the display,
see Edit, Delete or Hide Saved Tracks.
NOTE: When you save a track, a name is automatically assigned. The track name consists
of a date/time stamp, but can be re-named later (see Edit a Saved Track).
Clear the current track: From the Navigation X-Press
TM
menu, select Clear Current
Track and press the RIGHT Cursor key. The track will be removed from the display
and discarded.
21
M5565_ManE_531192-1_A.qxd 5/4/2003 9:39 PM Page 24