Filter
Top Products
29
Fish ID Alarm
Fish ID Alarm sounds when the FishFinder detects fish that
correspond to the alarm setting. Fish ID Alarm will only
sound if Fish ID+™ is on.
To chang
e the Fish ID Alarm setting:
1. Highlight Fish ID Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Fish ID Alarm
setting. (Off, All, Large/Medium, Large, Default = Off)
All
Large/Medium
Large
For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish
ID alarm will sound when a large-sized fish is detected.
28
Alarms Menu Tab
From any view, press the MENU key twice to access
the Main Menu System. The Alarms tab will be the
default selection.
NOTE: When an alarm is triggered, you can silence it by
pressing any key. The alarm will be silenced, and will not
be triggered again until you enter a new instance of the
alarm condition.
Depth Alarm
Depth Alarm sounds when the depth becomes equal to or
less than the menu setting.
To c
hange the Depth Alarm setting:
1. Highlight Depth Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Depth Alarm
setting. (OFF, 1 to 100 feet, or 5 to 30 meters [International Models Only],
Default = OFF)
Alarms Menu
FF585c_Man_English_531363-1_B.qxd 12/27/2004 8:33 PM Page 34