Filter
Top Products
35
Select Views
(Advanced)
Select Views sets the available views to either hidden
or visible in the view rotation. The view will be
removed from the view rotation if it is set to Hidden
and will be displayed in the view rotation if it is set to
Visible. The following views are available: Self Test,
Accessory Test, Sonar View, Sonar Zoom View, Big
Digits View, and their display status can be changed
only when in Advanced User Mode (see Setup Menu
Tab: User Mode.)
To Select Views:
1. Make sure you are in Advanced User Mode, then highlight Select Views on the
Setup menu.
2. Use the RIGHT 4-Way Cursor Control key to initiate this procedure.
3. The Select Views submenu will appear, showing a list of all Views that can be
hidden or made visible. Use the UP or DOWN Cursor keys to select a particular
view, then use the RIGHTor LEFT Cursor keys to change the View status from
Visible to Hidden or vice versa.
Select Views
34
Triplog Reset
(with Temp/Speed Only)
Triplog Reset resets the Triplog to zero, and will only appear in the menu if a
Temp/Speed Accessory is connected and the paddlewheel has moved at least once. The
Triplog provides the following information: timer for elapsed time, distance traveled
since last reset, and average speed.
NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display Triplog
information on the screen.
NOTE: The Timer, distance traveled and average speed information is remembered by the
FishFinder unit when it is powered off and will continue to be added to until the Triplog is reset.
To Reset T
riplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-Way Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor
key once more. To cancel Reset Triplog, press the LEFT Cursor key.
Restore Defaults
Restore Defaults resets ALL menu settings to their factory
defaults. Use this menu choice with caution!
To Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-Way Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT
Cursor key once more. To cancel Restore Defaults, press the LEFT Cursor key.
FF585c_Man_English_531363-1_B.qxd 12/27/2004 8:33 PM Page 40