Filter
Top Products
Setup Menu Tab
From any view, press the MENU key twice to access the
tabbed Main Menu System, then press the RIGHT cursor
key until the Setup tab is selected.
NOTE:
Units - Temp (International Models Only)
Units - Distance (Only if Temp/Speed is Connected)
Units - Speed (Only if Temp/Speed is Connected)
Language (International Models Only)
Triplog Reset (Only if Temp/Speed is Connected)
Select Views (Advanced)
Select Readouts (Advanced)
Depth Offset (Advanced)
Temp Offset (Advanced)
Speed Calibration (Advanced, Only
if Temp/Speed Connected)
Setup Menu
30
Low Battery Alarm
Low Battery Alarm sounds when the input battery voltage
is equal to or less than the menu setting. The battery alarm will only sound for the
battery which is connected to the FishFinder. The Low Battery Alarm should be set to
warn you when the battery voltage drops below the safety margin that you have
determined. For instance, if you are running a trolling motor (battery operated), you
would want to set the Low Battery Alarm to sound before the battery voltage drops too
low for it to be used to start your main, gasoline-powered engine.
T
o c
hange the Low Battery Alarm setting:
1. Highlight Low Battery Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Low Battery
Alarm setting. (Off, 8.5V - 13.5V, Default = Off)
Temp Alarm
Temp Alarm sounds when the water temperature
detected by the FF585c reaches the Temp Alarm setting, which is either set in degrees
Fahrenheit or Celsius [International Models Only]. For example, if the Temp Alarm is set
to 58 degrees Fahrenheit, and the water temperature falls from 60 degrees to 58
degrees, the Temp Alarm will sound. Similarly, if the water temperature rises from 56
degrees to 58 degrees, the Temp Alarm will also sound.
T
o change the Temp Alarm setting:
1. Highlight Temp Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Alarm
setting. (Off, 32-120 [Fahrenheit], 0-50 [Celsius [International Models Only]],
Default = Off)
Alarm Tone
Alarm Tone selects the pitch of the alarm sound. A brief
tone will be produced as you adjust the Alarm Tone so that you can select the tone that
you can hear best.
T
o change the Alarm Tone setting:
1. Highlight Alarm Tone on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Alarm Tone
setting. (High, Medium, Low, Default = Medium)
31
FF585c_Man_English_531363-1_B.qxd 12/27/2004 8:33 PM Page 36