Filter
Top Products
9
5
MEMORY PROGRAMMING
■ Programming a memory
channel
The transceiver has 19 memory channels for storage of often
-used frequencies.
qPush [V/M] to select VFO
mode, if necessary.
wPush [Y] or [Z] key to select
the desired frequency.
• Push [V/M] key one or more
times to use the dial select
function, if desired.
e Push [MW] for 5 sec. to enter
memory programming mode.
•“ ” and memory channel
number appear.
r Push [Y] or [Z] to select the
desired memory channel
number.
t Push [MW] for 2 sec. to pro-
gram the information into the
channel and return to VFO
mode.
MR
MR
MR
DSetting lockout channels
In order to speed up the scan interval, you can set memory
channels you don’t wish to scan as lockout channels.
qPush [V/M] to select memory mode, if necessary.
•“ ” appears.
wPush [Y] or [Z] to select a memory channel to set as a
lockout channel.
ePush [SCAN] for 2 sec. to toggle the lockout setting
ON/OFF.
•“SKIP” appears when the chan-
nel is set as a lockout channel.
•If memory channel scan is acci-
dentally started, push [SCAN] to
stop it.
MR
MR
SKIP
Memory channel 15 is
set as a lockout channel.
IC-A4#01 IM 01.12.5 5:14 PM Page 9 (1,1)