Filter
Top Products
11
6
OTHER FUNCTIONS
■ Initial set mode
Initial set mode is accessed at power ON and allows you to
set seldom-changed settings, in this way you can “customize”
transceiver operations to suit your preferences and operating
style.
DEntering initial set mode
qWhile pushing [V/M] + [ ], turn power ON.
•The transceiver enters initial set mode and “mn”, “bP” or “St” ap-
pears on the display.
wPush[Y] or [Z] one or more times to select the desired
item as described below and at right.
ePush [ ] to select the desired condition.
rPush [MW] or [PTT] to exit initial set mode and select the
previous operating mode.
DMemory names
This item allows you to display a
memory name instead of fre-
quency.
•When a memory channel has
not been programmed with a
name, frequency indication ap-
pears instead.
DBeep tones ON/OFF
Confirmation beep tones nor-
mally sound when you push a
key. These can be turned ON or
OFF as you prefer.
DSide tones ON/OFF
When using an optional headset
such as those from the David
Clark Co. via the adapter, the
transceiver outputs your trans-
mitted voice to the headset for
monitoring.
• Optional OPC-752 HEADSET
ADAPTER
is required.
■ Resetting the CPU
Reset the CPU before operating the transceiver for the first
time, or when the internal CPU malfunctions.
➥While pushing [V/M] + [MW] + [SCAN], turn power ON to
reset the transceiver.
•“CLEAR” appears briefly to indicate the CPU has been reset.
]
IC-A4#01 IM 01.12.5 5:14 PM Page 11 (1,1)