Filter
Top Products
38
12
HM-134 REMOTE-CONTROL MICROPHONE
■ Intercom operation
q Push and hold [DUAL] for 1 sec.
to activate the intercom function.
•“IC” appears in the priority channel
readout.
•The channel name disappears.
w Push [PTT] to talk.
•“ ” appears in the channel
name indicator.
e Release [PTT] to listen.
•“ ” appears in the channel name indicator when the trans-
ceiver is in talking mode.
r Push [DUAL] to cancel the intercom function.
•Pushing [16], [SCAN•TAG] or [DIAL] is also cancels the intercom
function.
For your reference:
In case the intercom mode is selected with the transceiver
during microphone power OFF, the microphone power is au-
tomatically turned ON and the intercom mode is selected.
ïï
Intercom beep function
➥Push and hold [DIAL] for more than 1 sec.
•Emits intercom beep while holding.
■ Channel names
q Push [Y]/[Z] to select a channel to program.
•While pushing and holding [H/L], push [DIAL] several times to
select the channel group (USA and INT), if desired.
w While pushing and holding [H/L], push [16•C].
•The 1st character of the currently programmed comment flashes.
e Push [Y]/[Z] to select a character.
r Push [SQL] to move to right; then push [Y]/[Z] to select a
character.
•Push [VOL] to move to the left.
t Continue until the desired characters have been selected,
then push [16•C] to return to normal operation.
•Available characters
(r)
(s) (t) (u) (v) (w) (x) (y) (z)
(q)
(3)
(D)
(N)
(X)
(h)
(+)
(4)
(E)
(O)
(Y)
(i)
(–)
(5)
(F)
(P)
(Z)
(j)
(✱)
(6)
(G)
(Q)
(a)
(k)
(/)
(7)
(H)
(R)
(b)
(l)
(,)
(8)
(I)
(S)
(c)
(m)
(space)
(9)
(T)
(d)
(n)
(0)
(A)
(U)
(e)
(o)
(1)
(B)
(V)
(f)
(p)
(2)
(C)
(J) (K) (L)
(M)
(W)
(g)
(.)
(
))((
)(’)(&)(
%
)($)(#)(")(!)
Appears when the inter-
com function is in use.
01 IC-M503-(1).qxd 01.12.17 5:00 PM Page 38 (1,1)