Filter
Top Products
13. Stack the compression discs onto the disc travel limiter. Place the disc stack/travel limiter on the
piston rod. (B7).
14. Place the piston on top of the compression stack. Be sure to orient the piston properly. Face the piston side
marked with a “C” towards the compression valve stack.
(B8)
15. Stack the rebound discs onto the rebound disc travel limiter. Place the disc stack/travel limiter on top of the
piston.
(B9)
16. Place the piston washer and nut on the piston rod, (B10) and torque to 216 in-lbs. (18 Ft-lbs.).
17. Remove the head assembly from the vice.
Stack compression discs onto disc travel limeter
B7
Place piston onto the compression stack
B8
Stack rebound discs onto rebound disc travel limiter
& place on piston
B9
Place piston washer & nut on piston rod
B10
Piston
Marked
“R”
Piston
Marked
“C”