Filter
Top Products
Setting Up the Chassis
Intel® Server Chassis SC5300 User Guide 13
Remove Bezel Assembly
✏
NOTE
If the chassis is on its side, move the chassis to hang over the side of a table
before proceeding.
1. Release the two plastic tabs (letter “A”) on the left side of the Bezel Assembly to disengage the
tabs.
2. Rotate the Bezel Assembly (letter “B”) no more than 40 degrees outward.
3. At a 40-degree angle, push the Bezel Assembly away from the chassis (letter “C”). If Bezel
Assembly does not immediately disconnect from the chassis, then tap the left-hand side of the
Bezel Assembly to disengage the bezel hooks on the right-hand side of the chassis.
TP00537
A
A
C
B
Figure 9. Removing Bezel Assembly