Filter
Top Products
24
DELETING THE ENCRYPTION KEY
1 Press the key programmed as Key Delete to enter Encryption Key Delete
mode.
2 Select the current Encryption key using the GRP and keys or the CH
control .
3 Press the PF 3 key (the third key from the left, after the CH control) to delete
the Encryption key.
4 Press the PF 1 or PF 2 key (the first or second key from the left, after the CH
control) to exit Encryption Key Delete mode.
Note: To delete all Encryption keys (when more than one key has been set up), select “ALL”.
PASSWORD PROTECTION
If the transceiver is password protected, entering an incorrect password
successively 15 times will automatically delete all the Encryption keys.
•Turning the transceiver power OFF and the ON again will not reset the number of
attempts for entering an incorrect password.