Filter
Top Products
13
Initial Settings
1. When you finish making connections, set the
power switch to the “ON” position. (This set-
ting is referred to as Play mode.)
Use the ▲/▼ buttons to select a program.
2. Set the input level switch for the output level
of your pickups.
Hi: High-output pickups
Lo: Low-output pickups
3. Set the volume control of your guitar to its
usual position. Use the Value dial to adjust
the master level.
Quick Edit
In each mode (except when Mute/Bypass or Key
Lock are active), you can use the Mic & Body
Modeling selector to quickly change the mic
or body modeling type, or use the control knobs
to adjust the tone, or volume. When you move a
control knob, the parameter name and value will
appear for several seconds in the value display.
If the setting matches the original setting, the
ORIG icon will light.
The Delay Time can also be set by pressing
the TAP button twice at the desired interval (ex-
cept when in Rhythm & Bass mode). To check
the Delay Time that was specified, press and
hold the TAP button for two seconds or longer.
Program selection
Program name
Input level
switch
Mic & Body
selection
Adjust the tone,
and volume
Program
number
Set the
delay time
Master level
adjustment
Settings that you make using Quick Edit will
return to the original saved settings if you
change programs or turn off the power before
Writing (see p.28).