Filter
Top Products
22
If the recording mode is “JAM,” the recording
quality will be set automatically, based on the tem-
po and the specified number of measures.
If you select a long recording time (16 or 32), the
audio quality of the recording will be lower.
If the tempo of the rhythm is extremely slow, it
will not be possible to record a large number
of measures. Please re-specify the tempo in
Rhythm & Bass mode (maximum length is ap-
proximately 31.7 seconds)
Start playback on your CD or other audio source,
and at the point where you wish to begin re-
cording, press the ENTER/REC button. Record-
ing will begin.
If the recording mode is “JAM,” recording will
begin after the precount.
If, after recording, you want to change the re-
cording mode or recording time, press the
PHRASE TRAINER button while playback is
paused.
The recorded content will be lost when the
power is turned off.
2.Recording
When you begin recording, the recording time
will be indicated as a numerical value and by a
value graph.
Recording
time display
When you want to stop recording, press the EN-
TER/REC button or the [®
❙❙
]. Recording will
stop, and loop playback will begin automatical-
ly. If you do not stop recording, recording will
continue until the selected recording time has
elapsed, and loop playback will begin automat-
ically. If the recording mode is “JAM,” recording
will end automatically at the specified number
of measures, and will switch to loop playback.
The phrase will be recorded and played back
in mono.