Filter
Top Products
15
You can also return to Play mode by pressing
the EXIT button. Bypass or Mute can also be
entered from modes other than Play mode.
4.Tuner
The tuner will operate when you bypass or mute.
meter
center mark
sharp
note name
calibration
Play a single string on your guitar. The LCD will
show the note name and the calibration. If the
pitch is more than a semitone higher than the
note name, a sharp symbol will appear at the
upper right of the note name. The display area
will act as a meter to show the pitch.
Tune each string of your guitar so that the indi-
cator above the center mark is lit.
The tuner (bypass/mute) will be turned off when
you press either the EXIT button or TUNE/BY-
PASS button.
You can also return to Play mode by pressing
the EXIT button.
Calibration (frequency of the standard A =
440 pitch)
You can use the Value dial to adjust the cali-
bration in the range of A = 438 Hz...445 Hz.
The calibration setting you make will be valid until
the power is turned off. Once the power is turned
off, the calibration will be reset to A = 440 Hz.