Filter
Top Products
26
Full Chart
The unit's default page, Full Chart shows all echoes scrolling across the
full screen. The bottom signal scrolls across the screen from right to
left. The line at the top of the screen represents the surface. The bottom
depth — determined by the digital sonar — shows in the upper left
corner.
If the transducer with a built-in temperature sensor is connected, a dig-
ital display for water temperature also will be shown. This temperature
display can be turned on and off.
Full Chart page, showing digital depth (above) and temp (below). The
Fish I.D. feature is turned off.
Depth Range
When turned on, the unit automatically adjusts the depth range ac-
cording to water conditions. When in auto range mode, it always keeps
the bottom displayed in the lower portion of the screen. You can over-
ride the automatic depth range control and manually select a depth
range.
To do this, repeatedly press
MENU until the DEPTH RANGE menu appears.
Press
↓ to select MANUAL, then press MENU UP to display the RANGE SIZE
menu. Use the arrow keys to select a desired depth range. When you
are finished, press
PWR to clear the menu from the display.
This unit has the following depth ranges: 10, 20, 40, 80, 150, 300, 600,
1000 and 2000 feet.
Gra
y
line
®
Fish arches
Bottom signal
Digital depth
Water Temp
Depth range
at bottom of
de
p
th scale
Surface clutter
Structure
or cove
r
Bait fish