Filter
Top Products
Lowrance's UPS Return
Service
Lowrance
Electronics and United Parcel Service
(UPS)
are
proud
to offer
all of
ourcustomersfreeshippingforall
unitssentto
usforrepairorservice.
If
you
have
to send this unit to the
factory,
and
you
are in the continental
United
States,
usethe enclosed UPS
shipping
label
foreasy,
free
shipping
to our
factory
customer service
department.
There are six
easy steps:
1
.Call Lowrance atthetoll-free numberonthefrontof
thisflyerfora
Return
Authorization
(IRA)
number and instructions about what accessories to
return. Do not return a
product
to the
factory
without a Return
Authorization
(RA)
Number!
2.
Pack
your
unit and
any
accessories in the
original shipping container,
if
possible.
Be sure to include
proof
of
purchaseforwarrantyverifica-
tion!
3. Write a brief note
detailing
the
problem you're having
with
the unit.
Please include
your name, address,
and
daytime
telephone
number.
4. Please include
payment
for
non-warranty repairs.
Check,
money
order,
Visa,
or MasterCard
may
be used.
5. Fill in
your name, address, zip code, date,
and RA number in the blanks
provided
on the UPS
form included with
your
unit.
6.Attach the label to the
shipping
box,
tear off the tab for
your receipt
and
give
the
package
to
any
UPS driver or take the
package
to
any
UPS
Customer Center.
You will not be
charged
for this
shipment.
That's it! Your unit will
be
shipped
to Lowrance's customer service
department
at no
charge
to
you.
Our normal
in-plantturnaround
on
repairs
is 3
working
days.
Units
underwarrantywill
be returned
toyou
at no
charge.
NOTE!
Lowrance will
pay
UPS surface
shipping charges
both to and from the
factoryforthis
unit in the event it needs
repair.
Yourunit is insured
against
loss or
shipping damage
when
you
use the enclosed UPS label.
Shoot-thru-bull v,s, Transom
Mounting
Typically,
shoot-thru-hull installations
give
excellent
high speed opera-
tion and
good
to excellent
depth capability.
There is no
possibility
of
damage
from
floating objects.
It can't be knocked off when
docking
or
loading
on the trailer.
However,
the shoot-thru-hull installation does have its drawbacks.
One,
some loss of
sensitivity
does
occur,
even on the best hulls. This varies
from hull to
hull,
even
from different installations on the same hull. This
is caused
by
differences in hull
layup
and construction.
Two,
the
angle
of the transducer cannot be
adjusted
for the best
fish arches. This can
be a
problem
on some hulls that sit with the bow
high
when at rest or at
slow
trolling speeds.
Follow the
procedure
listed in the shoot-thru-hull
installation section in this manual to determine if
you
can
satisfactorily
shoot
through
the hull.
TRANSOM MOUNT
-
Assembly
1. First attach the
mounting
bracket's halves
together
as shown below.
Next,
slide the rubber
pad
into the
space
between the two slots. This
pad keeps
tension on the bracket's
latch,
preventing
it from
opening
at a
low
speed.
Don't close the
bracket at this time!.
48
5
_
_
EJ
RuBBER PAD
Lb=H
PDF compression, OCR, web-optimization with CVISION's PdfCompressor