Filter
Top Products
Form A: System Configuration
Required for PARTNER Advanced Communications System.
For additional instructions, see page 3.
PAGE
2 of 3
9. System Settings. Write response on line for each item.
• Receptionist answers calls during business hours? Write “Yes” or “No” ______.
• Number of Lines {#104}—By default, 3 lines per PARTNER ACS processor module or
308EC module, 2 lines per 206 module, and 4 lines per 400 module are assigned to each
extension (or to pool 880 in Hybrid Mode). Write number if different from default ______.
• Transfer Return Rings {#105}—By default, a transferred call rings 4 times before going to
the transfer return extension. Write number (0-9, 0 = no return) if different from
default ______.
• Outside Conference Denial {#109}—By default, a conference call can include 2 outside
parties. Write “No” if 2 outside parties are not allowed ______.
• Call Coverage Rings {#116} (ACS Release 2.0 and later only)—By default, a covered call
rings 2 times before going to the covering extension. Write number (1-9) if different from
default ______.
• VMS Cover Rings {#117}—By default, a call rings 3 times before going to the user’s
mailbox. Write number (1-9) if different from default ______.
• Ring on Transfer {#119}—By default, the caller hears ringing when the call is transferred.
Write “NA” if music on hold or silence is desired ______.
• Toll Call Prefix {#402}—By default, 0 or 1 must be dialed before the area code for a
long distance call. Write “No” if 0 or 1 is not required ______.
• System Password {#403}—By default, no password is programmed to override dialing
restrictions and to turn Night Service on and off. Write 4 digits if password is
desired __ __ __ __.
• Star Code Dial {#410}—By default, the system inserts a 0-second delay after a
valid Central Office star code when it autodials. Write number (1–5) of seconds if a longer
delay is desired or “NO” if this feature should not be active ______.
• Music on Hold {#602}—By default, the Music on Hold jack on the processor module is
active. Write “No” if the jack is deactivated ______.
10. Line Coverage. Complete items based on Line Coverage selection on Form A, Item 8.
DXD:
(ACS Release 2.0 and later only)
If DXD is checked, specify the following:
Direct Extension Dial Delay {#112}—By default, a call rings 2 times before it is
answered by the system. Write number (0-9) if different from default _____.
Direct Extension Dial Record/Playback (I 892)—message of up to 20 seconds that
caller hears when call is answered with the Direct Extension Dial feature. Write
message below and record from extension 10 or 11:
VMS-AA: If VMS-AA is checked, specify the following:
VMS Hunt Delay {#506}—By default, VMS answers calls after 2 rings. Write “Del” if
calls ring 4 times before VMS answers _____.
VMS Hunt Schedule {#507}—By default, VMS is on all the time. Check if Day only or
Night only is desired:
■■ Day only
■■ Night only
ASA:
(ACS Release 2.0 and later only)
If ASA is checked, specify the following:
Automatic System Answer Delay {#110}—By default, a call rings 2 times before it is
answered by the system. Write number (0-9) if different from default _____.
Automatic System Answer Mode {#121}—By default, ASA calls are put on hold after the
greeting plays. Check if calls should continue to ring or be disconnected:
■■ Ring
■■ Disconnect
ASA Record/Playback (I 891)—message of up to 10 seconds that caller hears
when the call is answered by the Automatic System Answer feature. Write
message below and record from extension 10 or 11: