Lucent Technologies 518-456-151 Marine Radio User Manual


 
Intercom Intercom
Ext.
04
DEL
IN
PAGE
5 of 8
␣␣␣␣␣␣␣␣␣
Form C5: MLS-34D Phone
SAMPLE
Template Instructions
If desired, write in line number, pool access code
, dial code feature, or auto dial number
If desired, write in Line Ringing (Imm, Del, or No) from Form B2
If desired, write in Line Access Restriction or Pool Access Restriction
(Out, In, or No) from Form B2
Available with ACS R2.0 or later only.
Specify Automatic Line Selection: ________________________________________________________________
Identify extensions programmed as shown: ___________________________________________________
Check Desired Features
Also write in extension or group number
Account Code Entry (F 12)
2
ACE
Background Music (F 19)
2
Music
Call Forwarding/Call Follow-Me (F 11 XX XX)
2,4
CF-XX XX
Station Lock (F 21)
2
Lock
Caller ID Name Display (F 16)
ID-Name
Caller ID Inspect (F 17)
ID-Inspect
Conference Drop (F 06)
Drop
Direct Line Pickup-Active Line (
I
68)
DLPA
Direct Line Pickup-Idle Line (
I
8)
DLPI
Do Not Disturb (F 01)
DND
Exclusive Hold (F 02)
ExHold
Group Calling-Ring/Page (
I
7 G or
I
*7 G)
GCall-g
Group Pickup (
I
66 G)
P/U Grp-g
Last Number Redial (F 05)
LNR
Loudspeaker Paging (
I
70)
Loudspk
Manual Signaling (F 13 XX or F 13 *XX)
2
MS-XX
Message Light Off (F 10 XX)
5
MsgOff-XX
Message Light On (F 09 XX)
5
MsgOn-XX
Night Service Button {#503}
NightSvc
Automatic System Answer Button {#111}
6
ASA
Direct Extension Dial Button {#113}
6
DXD
Privacy (F 07)
Priv
Recall (F 03)
Recall
Save Number Redial (F 04)
SNR
Touch-Tone Enable (F 08)
TT-EN
VMS Cover (F 15)
VMSCover
Voice Interrupt on Busy Talk-Back (F 18)
VIOB
Voice Mail Messages Button (
I
77
7)
VMMsgs-777
Wake Up Service Button {#115}
Wake
Caller ID Call Log (F 23)
6
Calls
Contact Closure 1 (F 41)
2
CC1
Contact Closure 2 (F 42)
2
CC2
Call Pickup (
I
6 XX)
Pickup-XX
Call Park (
I
XX)
3
Park
Call Coverage (F 20 XX XX)
2,4
,6
Cover-XX XX
Outgoing Call Restriction Button {#114}
1
OCR
LED Required
Group Hunt-Ring/Signal (
I
77 G or
I
*77 G)
Hunt-g
Ext. 10 Only
Voice Mailbox Transfer (F 14)
VMBox
Fax Management (
I
XX)
2
FAX-XX
Intercom Autodial (
I
XX or
I
*XX)
2
Ext-XX
Simultaneous Paging
(
I
* 70)
SPage
Make as many copies as you need. Use template and/or checklist. For additional instructions, see pages 8 through 13.
1. Requires Auto
Dial button for
each extension.
2. Button with
lights is
recommended,
but not required.
3. Extension
number can be
programmed as
Auto Dial
button.
4. You can
program the
origination
extension only
or both the
origination and
destination
extension.
5. You can
program the
extension
number.
6. Available with
ACS R2.0 or
later only.
F = Feature button
G = Group
I = Left Intercom
button
XX = Extension
*
In Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool.
(ACS R2.0 or later only)