Filter
Top Products
Navigator User Guide
4
To play music from your PC on your Navigator Handsfree speakers:
• Plug the Navigator audio cable into the appropriate port on your PC.
For more detailed information on connecting PC accessories to the Navigator, refer to the
Navigator Installation Guide shipped with the phone.
About Feature Access Codes
To use some features, you must dial access codes. The codes are flexible and may be different
than those in this guide. Ask your Administrator for a list of codes you should use.
For Users on Resilient 3300 ICP Systems
If during a call, you hear two beeps repeated every 20 seconds it means that your phone is
switching to a secondary 3300 ICP system. The call continues but some of the keys and features
on your phone function differently. The keys and most features begin working normally again after
you hang up. If your phone switches to the secondary system while your speaker or handset is
muted (that is, while the
key light is on), the call remains muted until you hang up. Normal
operation resumes when your phone switches back to the primary system. If your phone is idle
and switched to the secondary system, you'll see a flashing rectangle on the display. The
rectangle remains until the switch to the primary system is complete.
TIPS FOR YOUR COMFORT AND SAFETY
Don't cradle the handset!
Prolonged use of the handset can lead to neck, shoulder, or back discomfort, especially if you
cradle the handset between your ear and shoulder. If you use your phone a lot, you may find it
more comfortable to use a headset. See the section on headset usage elsewhere in this guide for
more information.
Protect your hearing
Your phone has a control for adjusting the volume of the handset receiver or headset. Because
continuous exposure to loud sounds can contribute to hearing loss, keep the volume at a
moderate level.