Call Handling
• To announce the Transfer, wait for an answer, consult, and hang up.
• To cancel the Transfer, press
(CANCEL).
To transfer an active call during headset operation:
1. Press
(TRANS/CONF).
2. Dial the number of the third party.
3. To complete the Transfer, press the Release feature key.
Conference
To form a Conference when a two-party call is already in place, or to add another party to an
existing Conference:
1. Press
(TRANS/CONF).
2. Dial the number of the next party.
3. Wait for an answer.
Note: If the party does not answer, press (CANCEL) twice to return to the call in
progress.
4. Press
(TRANS/CONF).
To leave a Conference, do one of the following:
• Hang up
• Press
(CANCEL).
• Press the HangUp softkey.
Conference Split
To Split a Conference and speak privately with the original party:
• Press the Split softkey.
Add Held
To move a call on Hold to another line appearance:
1. Press the available line key.
2. Press the Addheld softkey.
3. Press the flashing line key.
To add a call on Hold to an existing conversation or conference:
1. Press the Addheld softkey.
2. Press the flashing line key.
41
