Filter
Top Products
2
Pre-Operation Information
1.1 Pre-Operation Information
1.1.1 Precautions for operation
Incorrect handling might cause the inverter option to operate improperly, its life to be reduced considerably, or at the
worst, the inverter option to be damaged. Handle the power regeneration common converter properly in accordance
with the information in each section as well as the precautions and instructions of this manual to use it correctly.
This manual is written for the power regeneration common converter FR-CV.
For handling information on the inverter, stand-alone options, etc., refer to the corresponding manuals.
(1) Unpacking and product check
Unpack the power regeneration common converter and check the capacity plate on the front cover and the rating
plate on the inverter side face to ensure that the product agrees with your order and the inverter is intact.
1) Definition of the power regeneration common converter type
2) The power regeneration common converter accessory
Instruction manual
3) Definition of the dedicated stand-alone reactor
Remember to prepare the dedicated stand-alone reactor as it must be installed.
If you have found any discrepancy, damage, etc., please contact your sales representative.
(2) Confirmation of the peripheral device types
The dedicated stand-alone reactor must be installed.
Power regeneration common converter Dedicated stand-alone reactor (required)
FR-CV-7.5K(-AT) FR-CVL-7.5K
FR-CV-11K(-AT) FR-CVL-11K
FR-CV-15K(-AT) FR-CVL-15K
FR-CV-22K(-AT) FR-CVL-22K
FR-CV-30K(-AT) FR-CVL-30K
FR-CV-37K FR-CVL-37K
FR-CV-55K FR-CVL-55K
Note: 400Vclass devices have capacity numbers preceded by H in their type codes.
FR-CV-11K
Converter type Serial number
Capacity plate
Rating plate
MITSUBISHI
MODEL
INVERTER
FR-CV-11K
INPUT :
OUTPUT :
SERIAL :
XXXXX
XXXXX
PASSED
Serial number
Converter
type
Capactiy plate
Rating plate
FR-CV- K-
Symbol
7.5 to 55
Applicable Inverter
Capacity
Indicates capacity
in "kW".
Symbol
None
AT
Structure
Heat sink outside mounting structure
Enclosure inside installation structure
Symbol
None
H
Voltage class
200V class
400V class
Input rating
Output rating
FR-CVL-11K
Capacity plate
FR-CVL- K
Symbol
7.5 to 55
Applicable Converter
Capacity
Indicates capacity
in "kW".
Symbol
None
H
Voltage class
200V class
400V class
Capacity plate
Reactor type