Filter
Top Products
1. Place the Inflatable PFD (Personal Flotation Device)
on a smooth, flat surface and wipe off any water. If
needed, unpack the PFD starting at the zipper flap.
Access the inflator by reaching between the cover and
cell and pull it toward you, turning the cell and cover
inside-out to fully expose the inflator for re-arming.
Hold the CO
2
cylinder through the fabric, using one
hand (Figure 8).
2. Insert the metal key between the black locking ring
and labeled yellow cap. Turn the key counter-clockwise
(Figure 9).
3. Turn the black locking ring counter-clockwise and lift off the cap (yellow inflator
operating head Figure 10). Dispose of the used cap.
4. Squeeze the sealing ring to elongate and remove the inflator body through the sealing
ring (Figure 11).
5. Dispose of the used inflator body (Figure 12).
Locking Ring
Key
Figure 9
Cap
Figure 10
Red Indicator
Trash
Figure 12
Red Indicator
Inflator Body
Sealing Ring
Figure 11
Figure 8
MD3188 Inflatable PFD Manufacturer's Manual
9