Filter
Top Products
18
OCL OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5378-r01 (4/9/15)
Log sequence >> Lead-in >> Preview >> Data 1 >> Data 2 >> Data 3
Log Lead-in, information includes (Fig. 31):
> Log Mode (book) icon
> Graphics NOR - GAU
• A (< 2 sec) - to access Set G Lead-in.
• M (< 2 sec) - to step back to Plan Lead-in.
• S (< 2 sec) - to access Log Preview.
• L (press) - to operate the Backlight.
Log Preview, information includes (Fig. 32):
> Log Mode (book) icon
> Date (month.day or day.month), the dive was conducted; or blank if none recorded
> Time dive began (hr:min) with AM (or PM) icon if 12 Hour Format, no icon if 24 Hour Format; or graphic NONE
> Graphic NOR (or GAU or VIO or YET )
> Dive number (1 to 24, 0 if no dive yet) with DIVE icon
• A (< 2 sec) - to step through Preview screens from the most recent to the oldest recorded.
• A (hold) - to scroll through Preview screens 8 per second from the most recent to the oldest recorded.
• M (< 2 sec) - to step through Preview screens in the opposite direction.
• S (< 2 sec) - to access Data 1 for the dive Preview displayed.
• S (2 sec) - to revert to the Lead-in screen.
• L (press) - to operate the Backlight.
Log Data 1, information includes (Fig. 33A, B):
> Log Mode (book) icon
> Pre dive Surface Interval (hr:min), - : - - if no pevious dive that activation period, with SURF icon
> Total Ascent Time (min) with TAT and min icons, if Deco; blank if No Deco
> Max Depth with MAX and FT (or M) icons
> Elapsed Dive Time with DIVE and min icons
> TLBG with the max accumulation segment ashing, others xed up to end of dive accumulation. All segments ashing if
a Delayed Violation. No TLBG if Gauge Mode.
> VARI, max Ascent Rate sustained for 4 seconds
• S (< 2 sec) - to access Data 2 for that dive.
• S (2 sec) - to revert to Preview screen.
• L (press) - to operate the Backlight.
Log Data 2, information includes (Fig. 34):
> Log Mode (book) icon
> Temperature (minimum that dive) with graphic F (or C)
> Graphic SEA (or EL2 to EL7), indicating the Altitude at which the dive was conducted
• S (< 2 sec) - to access Data 3 for that dive; or revert to Preview if a GAUG dive.
• S (2 sec) - to revert to the Data 1 screen for that dive.
• L (press) - to activate Backlight.
Log Data 3, information includes (Fig. 35):
> Log Mode (book) icon
> O2% at end of dive, 2 dashes if Violation Gauge Mode, with O2sat icon
> Highest PO2 (ATA) reached during the dive with PO2 and MAX icons
> FO2 set point for the gas in use when the dive ended, with icon
> Gas 1 (or 2) icon, one in use when the dive ended
• S (< 2 sec) - to revert to the Preview screen.
• S (2 sec) - to revert to the Data 2 screen for that dive.
• L (press) - to activate Backlight.
SET GAS MENU
Each Gas has an individual FO2 setting and an associated PO2 Alarm setting.
Default settings are FO2 Air with no PO2 value for Gas 1, and Off for Gas 2. Settings revert to the defaults when 24 hours
elapse without conducting a dive.
When FO2 is set for Air -
> calculations are the same as when FO2 is set for 21%.
> it remains set for Air until set for Nitrox (21 to 100%).
> O2 data (such as PO2, O2%) will not be displayed at any time during the dive, on the surface, or in Plan mode.
Fig. 31 - LOG LEAD-IN
Fig. 32 - LOG PREVIEW
(after NORM dive 1)
Fig. 33A - LOG DATA 1
Fig. 33B - LOG DATA 1
(Deco during dive)
Fig. 34 - LOG DATA 2
Fig. 35 - LOG DATA 3