Filter
Top Products
40
OCL OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5378-r01 (4/9/15)
Fig. 112 - FREE DIVE MAIN
Fig. 113 - FREE DIVE MAIN
(during rst 1 min on surface)
Fig. 114 - FREE DIVE ALT 1
Fig. 115 - FREE DIVE ALT 2
SELECT OP MODE
The Lead-in screen (Fig. 111) and selecting a Dive Operating Mode are similar to that previously described for NORM.
Refer to page 22.
SHARED SETTINGS
To change items that FREE Mode shares with NORM Mode, rst access the NORM Menu, then Set U, then select Set -
> Water Type
> Wet Activation
> Units
> Algorithm
> Conservative Factor
> Glo Duration
Upon descent to 5 FT (1.5 M) for 5 seconds, operation will enter Free Dive Mode.
------------------------------------------------------------------
FREE DIVE MAIN, information includes (Fig. 112) -
> Current Depth with FT (or M) icon
> Dive Time Remaining (min) with NDC and min icons
> Temperature with graphic F (or C)
> Elapsed Dive Time (min:sec) with DIVE and min sec icons
> TLBG
• A (< 2 sec) - to access ALT 1.
• L (press) - to operate the Backlight.
Upon ascending to 2 FT (0.6 M) during a dive, Surface Interval time will be displayed with the SURF icon ashing for the
rst 1 minute and NDC will be displayed as 2 dashes (Fig. 113).
After 1 minute elapses, operation will revert to Surface Mode and full access given to the FREE Surface Menu items.
If a descent is made to 5 FT (1.5 M) for 5 seconds, the dive will be continued. Surface time will not be added to Dive
Time.
FREE DIVE ALT 1, information includes (Fig. 114) -
> Remaining Countdown Time (min:sec) if On and a CD is in progress or 0:00 if On and the CD is complete, with colon
ashing. If Off, the CD Time previously set is displayed with colon solid indicating it is ready to start.
> Graphics CDT - , and OFF (or ON) ashing
• S (< 2 sec) - to toggle between ON and OFF (start/stop the timer).
• A (2 sec), when OFF - to reset the timer to the min:sec set
.
• A (< 2 sec) - to access ALT 2.
• Revert to Main in 10 sec, if S or A is not pressed.
• L (press) - to operate the Backlight.
When On, the CDT will run in the background while the Main is displayed until it counts down to 0:00, or it is turned Off.
FREE DIVE ALT 2, information includes (Fig. 115) -
> Time of Day (hr:min), with AM (or PM) icon if 12 Hour
> Max Depth with MAX and FT (or M) icons
• 10 sec or A (< 2 sec), revert to Main.
• L (press) - to operate the Backlight.
Fig. 111 - SET M LEAD-IN