Filter
Top Products
52
VTX OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5382-r01 (10/24/14)
UPLOADING/DOWNLOADING
As previously described (page 13), the VTX can be paired with a PC, Mac, or mobile device utilizing the Bluetooth function
together with a dongle* (Fig. 91) that plugs into the PC/Mac USB port.
*The dongle can be obtained as an optional accessory from an Authorized Oceanic Dealer.
It can also be connected with a PC or Mac using a USB cable and adapter clip provided.
USB Connection
The VTX is configured with a 4 pad interface connection port located on the back of the case (Fig. 92).
To connect the VTX to a PC or Mac USB port, the USB interface cable provided is connected into the adapter clip provided
(Fig. 93A) that is clamped onto the VTX.
When clamping the clip onto the VTX, ensure that the 4 pins on the clip are properly fitted over the 4 pads on the VTX (Fig.
93B).
Bluetooth connection will be blocked when there is USB connection. If a USB connection cable is plugged in while there is Blue-
tooth connection, the Bluetooth connection will be disabled.
If a download, upload, or firmware update operation is in progress using Bluetooth, the operation will be allowed then the
Bluetooth connection will be disabled upon completion when the USB connecting screen is to be displayed (Fig. 94A) until the
connection is accepted then a 120 second countdown is to be displayed (Fig. 94B) until the connection is made indicated by the
signal icons changing from white to green with the graphic (Fig. 94C).
While downloading data, uploading settings, and updating firmware, corresponding screens are displayed indicating action in
progress (Fig. 94D, 94E, 94F).
--------------------------------------------------------------------------------
PC requirements:
• IBM
®
, or compatible, PC with Intel
®
Pentium 4 or better microprocessor
• Microsoft
®
Windows
®
XP, Vista, 7, or 8
• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen
area of display settings
• 128MB of available RAM
• 64MB of available hard drive storage
• Mouse
• CD Rom drive
• Printer
Mac requirements:
• Mac with OSX 10.5 or later
• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen
area of display settings
• 128MB of available RAM
• 64MB of available hard drive storage
• Mouse
• Printer
• Internet connection to download App from the Apple App Store
For software updates, refer to the Oceanic web site >>>> www.OceanicWorldwide.com
For support, call Oceanic Customer Service toll free at >>>> (866) 732-7877, 8 Am to 5 Pm USA Pacific time.
Fig. 94B - COUNTDOWN
Fig. 94C - CONNECTION
MADE
Fig. 94A - CONNECTING Fig. 94D - IN PROGRESS
Fig. 92 - INTERFACE PORT
Fig. 93A - USB CABLE
ADAPTER CLIP
Fig. 91 - BLUETOOTH
DONGLE
Fig. 93B - ADAPTER CLIP
INSTALLED
Fig. 94E - IN PROGRESS Fig. 94F - UPDATE
COMPLETED
WAIT FOR THE
CONNECTION
TO BE ACCEPTED
119 SECONDS
DC
PC
CONNECTED
DC
PC
DOWNLOADING
DC
PC
UPLOADING
DC
PC
DC
PC
UPDATING FIRMWARE
WAIT FOR PC MESSAGE