Filter
Top Products
10
2. Inserting and Replacing Batteries
1. Slide the battery cover in the direction of the arrow,
and lift the end of the cover upwards.
Note: Do not pull too hard on the cover.
2. Insert two LR03 (AAA) batteries as indicated.
Always use LR03 (AAA) batteries.
Note: Make sure that the polarity of the batteries is
correct.
3. Close the battery cover.
Lower the battery cover (1), then while gently
pressing the cover down, slide it in the direction of
the arrow (2).
1
2
HCG-801-E.book Page 10 Tuesday, December 13, 2011 5:35 PM