Filter
Top Products
22
6. Taking a Measurement
1. Press the button to turn the unit on.
The unit displays a reminder that self-measurement
is not the same as medical diagnosis and then the
guidance screens are displayed. (The guidance
screens are displayed twice.)
Note: You can press the START button to begin a
measurement even while the guidance
screens are being displayed.
2. Make sure that you are in a relaxed position.
The ideal posture is one where you are seated comfortably with your back straight.
Note: You can also take a measurement while you are standing or while lying
down.
3. Place your finger so that it fits closely over the two
finger electrodes.
Notes:
• Even if you are left-handed, use your right hand to
take a measurement.
• Take care not to press the START button until you
are ready to take the measurement.
Fit finger closely on the
electrodes.
Do not press START button
until ready to take
measurement.
HCG-801-E.book Page 22 Tuesday, December 13, 2011 5:35 PM