Filter
Top Products
C2473M-C (8/06) 5
Description
Pelco’s IPS-RDPE-2 data port box is an on-site service tool designed for Spectra III
™
SE, Spectra III, Esprit
®
, and ExSite
™
Series positioning
systems. The data port box gives on-site access for setup and testing of the positioning system.
The IPS-RDPE-2 can be used to locally view video and control pan/tilt/zoom functions of a Spectra III SE/Spectra III, Esprit, or ExSite system. The
data port box can also upload revised operating software and language files to a Spectra Series III SE/Spectra III or ExSite system.
The IPS-RDPE-2 features an RJ-45 port that provides a communication interface between Pelco’s positioning systems and a Windows
®
-based PC,
Palm
™
OS-compatible handheld, or iPAQ
™
pocket PC. Pelco’s serial interface cable (IPS-CABLE) is required for data transmission.
REQUIRED ACCESSORIES
One of the following accessory options (not supplied) is required to view video, control pan/tilt/zoom, or upload revised operating software and
language files using an IPS-RDPE-2.
OPTION 1
• Operating software
• IPS-RMK remote monitor kit. Kit includes a 5.9-inch TFT-LCD monitor, Palm OS-compatible handheld with serial cable, and an IPS-CABLE.
OPTION 2
• Operating software version 1.2 or higher
• IPS-CABLE serial interface cable
• Windows-based PC, Palm OS-compatible handheld, or iPAQ pocket PC (not available through Pelco)
• Serial interface connectors and matching connections for the PC, Palm OS-compatible handheld, or iPAQ pocket PC (not available through
Pelco)
• Hand-held monitor (not available through Pelco)
NOTE: To upload software the following system software must be installed:
• Spectra III dome drive must have software version 1.2 or higher installed.
• ExSite explosionproof system must have software version 1.13 or higher installed.
Software cannot be uploaded to an Esprit system.