Filter
Top Products
INSTALLATION OVERVIEWWARRANTY
MAINTENANCE
OPERATION
Sleeve cleaning
Minerals in the water slowly form a coating on the sleeve. This coating must be removed because it
reduces the amount of UV light reaching the water, thereby reducing purification performance.
Basic models: please clean the sleeve regularly (3-4 times per year, or more often depending on
water quality).
When only cleaning is required, follow instructions and re-install the current lamp.
Lamp replacement
The amount of UV light created by the lamp decreases over time, requiring that the lamp be replaced
every 12 months. NOTE: The UV system is designed to operate continuously and should not be shut
off for short periods of time, such as over a period of less than three weeks.
PUV-Basic Model: Please keep track of your lamp's life. After 12 months follow these instructions to
replace system with a new lamp.
PUV-8 and PUV-16 Models : The system will automatically notify you after 12 months to replace the
lamp. Follow these instructions.
Equipment required:
Cloth must be
soft, lint-free, and
chemical-free. No
clean-wipes.
Scale remover
such as vinegar
or a citrus-based
product.
Cotton swab.
(For Plus models
only)
Clean cotton,
latex or plastic
gloves are
preferred.
SLEEVE CLEANING & LAMP REPLACEMENT
16