Filter
Top Products
INSTALLATIONOVERVIEW
MAINTENANCE
OPERATION
WARRANTY
4
3
2
6
Let the system cool for 10 minutes.
5
1
7
8
Open a tap downstream of the UV unit to
release pressure. Then, close this tap.
Hold by
sleeve bolt
to remove
lamp/sleeve
assembly.
Strain relief
wires should
remain
connected.
Squeeze
tabs
1
2
1
2
9
For sleeve cleaning only:
For lamp or sleeve replacement:
Clean sleeve and follow steps 10-13.
Note: Sleeve must be replaced if it cannot be
completely cleaned or if it appears scratched or
cracked.
Skip to step 14.
17