Filter
Top Products
Is weak signal causing poor reception?
Purchase and install a signal amplifier for better reception.
In areas where Antenna cable is not supported, first, attach Connecter to TV antenna .
3. Connecting DVD/DTV Set Top Box
Connect to the DVD/DTVSet Top Box input if the device has a DVD/DTV connector.
You can watch Component simply by hooking up the Component with the monitor as long as the
power is on.
1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the
R-AUDIO-L
port of the monitor.
2. Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the P
R, PB,Y input ports using a
component video cable (P
R, PB,Y).
3. Select Component using the
SOURCE
.
4. Connecting Headphone
You may connect your headphones to the monitor.