Samsung 940MW Marine Instruments User Manual


 
DVI-D to DVI-D connector, Detachable, 2.0 m (Option)
Signal connectors
15pin 3-row D-sub connector, 24pin 3-row DVI-D connector
Power Consumption
Less than 55 W
Power Saving
Less than 2 W
Dimensions (WxDxH)/ Weight
466 x 217 x 406 mm / 18.3 x 8.5 x 16.0 inch / 6.2 kg (With Stand)
466 X 66 X 371 mm /18.3 x 2.6 x 14.6 inch (Without Stand)
VESA Mounting Interface
75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating Temperature: 50°F to 104°F(10°C to 40°C)
Humidity: 10% to 80%, Non-condensing
Storage Temperature: -4 °F ~113 °F(-20 °C ~ 45 °C)
Humidity: 5% to 95%, Non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer
systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will
proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one
millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be
bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it
without uneasiness.
z
For example, the number of TFT LCD sub pixels that is contained in this product are 3,888,000.
Note: Design and specifications are subject to change without prior notice.
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by
switching your monitor into a low-power mode when it has not been used for a certain amount of time. The
monitor automatically returns to normal operation when you press a key on the keyboard. For energy
conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The
PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a
software utility installed on your computer to set up this feature.
State
Normal Operation
Power saving mode Power off
Power Indicator Green Green, Blinking Black
Power Consumption
Analog/Digital
Less than 55 W
Analog/Digital
Less than 2 W
(Off-mode)
Less than 2 W
(110Vac)
Preset Timing Modes