Filter
Top Products
Area
Configuration
When you turn the power on of the product for the first time since it released
from a factory, menu to select location will appear.
Choose the region and country where you use the monitor.
This is because broadcasting type varies according to region and country.
You can select broadcasting type in OSD menu as well by selecting MENU-
Setup-Area Configuration.
This product can be used worldwide if area configuration is set
up regardless of broadcasting type.
If country is not selected properly, the product may not locate
channels.
Language You can choose one of 8 languages.
The selected language is only applied in the Monitor Screen
Settings menu.
It has no effect on any software running on the computer.
Sleep Timer Turns the monitor off after a pre-determined period of time.
Off, 30, 60, 90, 120, 150, 180
Transparency Change the opaqueness of the background of the OSD.
High
Medium
Low
Opaque
Blue Screen If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to continue
viewing the poor picture, you must set the "Blue screen" mode to "Off".
On / Off
Reset Picture parameters are replaced with the factory default values.
- Available in PC Mode Only
Image Reset
: Image parameters are replaced with the factory default values.
Colour Reset
: Color parameters are replaced with the factory default values.
Ima
g
e Reset
Colour Reset