Filter
Top Products
© 2011 Schneider Electric. All Rights Reserved.
63230-500-225A2 PowerLogic
TM
Series 800 Power Meter
3/2011 Chapter 3—Operation
21
Lock Resets Setup
Alarm Backlight Setup
Bar Graph Setup
1. Perform steps 1 through 5 of the SETUP MODE
Access procedure on page 11.
2. Press
###: until ADVAN (advanced setup) is
visible.
3. Press ADVAN.
4. Press
###: until LOCK is visible.
5. Press LOCK.
6. Select Y (yes) or N (no) to enable or disable
resets for PK.DMD, ENERG, MN/MX, and
METER.
7. Press OK.
8. At the SETUP MODE screen, continue
programming additional setup features or
press
1; until you are asked to save changes.
9. Press YES to save the changes.
KNBJ2DRDSR
.
/+
%.%2'
-MLW
-DSDQ
9
.
.
0+$-$
PLSD110200
1. Perform steps 1 through 5 of the SETUP MODE
Access procedure on page 11.
2. Press
###: until ADVAN (advanced setup) is
visible.
3. Press ADVAN.
4. Press ###: until BLINK is visible.
5. Press BLINK.
6. Enter ON or OFF.
7. Press OK.
8. At the SETUP MODE screen, continue
programming additional setup features or
press
1; until you are asked to save changes.
9. Press YES to save the changes.
/+
/.
!,!2-"!#+,)'(4
PLSD110215
1. Perform steps 1 through 5 of the SETUP MODE
Access procedure on page 11.
2. Press
###: until ADVAN (advanced setup) is
visible.
3. Press ADVAN.
4. Press
###: until BARGR is visible.
5. Press BARGR.
6. Press AMPS or PWR.
7. Select AUTO or MAN. If MAN is selected, press
OK and enter the %CT*PT and KW (for PWR)
or the %CT and A (for AMPS).
8. Press OK.
9. At the SETUP MODE screen, continue
programming additional setup features or
press
1; until you are asked to save changes.
10. Press YES to save the changes.
"@QFQ@O(RB@KD
072!-03
PLSD110231