Filter
Top Products
description/installation
h1000 pilot
Page 24
splitting the ram drive unit
Note: when dealing with any hydraulic system great care must be taken to ensure that a high
degree of cleanliness is observed and no dirt, moisture or foreign objects are allowed to
enter the system. When filling or topping up the external reservoir only use a good quality
ISO 10 hydraulic oil e.g., Q8 Dynobear 10 (10cSt at 40
0
C).
It is not possible to split the following linear drives:
x
RAM-T0-12V
x
RAM-T1-12V
x
RAM-T2-12V
x
RAM-T2-24V
type 0, type 1 and type 2 units
Comprise a combined ram/pump, reservoir and hydraulic cylinder. These units cannot be split.
type 3 units
Are supplied as split units, connected by 1m (3ft) hoses. These can be supplied with quick connect
couplings and pre-filled hoses. These units do not need to be bled.
Note:
types 3 units with longer hoses are available from your dealer.