Filter
Top Products
Page 29Phantom PS2000
10.13 PA/FOG OPERATION
PA/FOG mode allows the transceiver to be used as a 30W hailer when an
optional STANDARD HORIZON 220SW or 240SW HAIL/PA Horn is installed.
When in Hail mode the HAIL/PA Listen’s Back (acts as a microphone and sends
sound to the CMP25 RAM+ Microhone’s speaker) through the HAIL/PA speaker
which provides two-way communications through the HAIL/PA speaker.
NOTE
When in PA or FOG mode the PS2000 will receive the last selected VHF
channel before entering into the PA or FOG mode and receive DSC calls.
PA HAIL mode: Allows the transceiver to be used as a power hailer when
an optional STANDARD HORIZON 220SW or 240SW
HAIL/PA Horn is installed. The Hail mode has a listen-back
feature which provides two way communication through
the HAIL/PA speaker.
FOG HORN mode: Automatic signaling is transmitted through the HAIL/PA
speaker.
10.13.1 Operating the PA HAIL Mode
1. Press and hold down the
[
NAV
]
key until “PUBLIC
ADRESS
” notation appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key to activate the
PA HAIL mode.
Listen-back the sound through the HAIL/PA speaker.
3. Press the PTT switch to speak through the HAIL/PA
speaker.
4. Press the
[
]
or
[
]
key while press and holding
the PTT switch to control the AF output level. The
AF output level can be set from 0 to 30 watts.
5. To exit the PA HAIL mode and return to radio opera-
tion mode, press the
[
16/9
]
key.