Filter
Top Products
Page 51Phantom PS2000
12.4 TIME LOCATION
This selection selects the time display between local time and UTC time (GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the
[
NAV
]
key.
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key until
“RARIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then press the
[
]
or
[
]
key to select “LOCAL TIME” menu.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
]
or
[
]
key to select “on (local time)” or “of
(UTC time).”
5. Press the
[
CALL
(
SET
)
MENU
]
key to store the selected set-
ting.
6. Press the
[
16/9
]
key to return to radio operation.
12.5 CHANGING GPS INFORMATION TO
VESSEL POSITION OR COG
Allows customizing the NAV data showing GPS Information. Factory default is
“Your Vessel’s Current Position,” however, following the steps below the GPS
Information can be changed to “Course Over Ground (COG).”
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key until
“RADIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then press the
[
]
or
[
]
key to select “NAV DISPLAY” menu.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
]
or
[
]
key to select “Pos (Your Vessel’s Cur-
rent Position)” or “Cru (Course Over Ground).”
5. Press the
[
CALL
(
SET
)
MENU
]
key to store the selected set-
ting.
6. Press the
[
16/9
]
key to return to radio operation.