Filter
Top Products
Phantom PS2000Page 56
12.13 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key until
“RADIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then press the
[
]
or
[
]
key to select “FOG FREQ” menu.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
]
or
[
]
key to select desired tone frequency.
5. Press the
[
CALL
(
SET
)
MENU
]
key.
6. Press the
[
CALL
(
SET
)
MENU
]
key to store the selected set-
ting.
7. Press the
[
16/9
]
key to return to radio operation.
12.14 EXTERNAL SPEAKER SELECTION
This selection allow the CMP25 RAM+ internal speaker to be turned off and so
an external speaker can be used. For connection of an external speaker refer
to page 11.
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key until
“RADIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then press the
[
]
or
[
]
key to select “EXT SPK” menu.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
]
or
[
]
key to select “on” or “of.”
“on”: EXT. speaker “on,” CMP25 RAM+ internal speaker “off”
“oF”: EXT. speaker “off,” CMP25 RAM+ internal speaker “on”
5. Press the
[
CALL
(
SET
)
MENU
]
key to store the selected set-
ting.
6. Press the
[
16/9
]
key to return to radio operation.