Filter
Top Products
Instruction Manual
11
UDP Mode
When UDP mode is enabled, TCP mode will be disabled automatically. In UDP mode,
the Local Port will be assigned to this device. You can list the remote connection IP and
Port for up to 10 remote devices.
Once you have completed making changes, press "Update" to store the data. Reset the
device to take eect.
Mode
Listen: When in UDP Listen mode, it can only receive remote UDP data.
Normal: When in UDP Normal mode, it can both receive and send UDP data to
remote units.
Local Port
Assign the UDP port that this unit listens on.
Remote Address
The remote address table allows users to set several remote site IP addresses and ports.
When sending data, the device will send UDP data to the IP addresses in the table.