Filter
Top Products
Instruction Manual
4
Introduction
Packaging Contents
• 1 x Serial over IP Device Server
• 1 x Universal Power Adapter (NA/UK/EU)
• 1 x Software CD
• 1 x Instruction Manual
• 1 x DIN Rail Kit
Installation
Web Browser Method
1. Plug in the power adapter and connect the RJ45 interface to your LAN.
NOTE: Alternatively, you can also use a crossover cable to connect the NETRS2321P
directly to your system for the initial conguration.
2. Press and hold the load default button for more than 3 seconds and less than 10
seconds, then release it. This will return the serial device server to factory default
and it will respond to the IP address 10.1.1.1.
3. Congure the PC to the same IP domain.
4. Open a web browser and connect to http://10.1.1.1 to open the conguration
interface. The default login ID will be “admin” and the password will be “admin”.
5. Once logged in, you will have access to all conguration settings including the
ability to change the IP address for the device server.
Virtual COM Port Application
1. Plug in the power adapter and connect the RJ45 interface to your LAN.
2. Insert the included CD and launch the VirtualCom software.
3. Follow the on-screen instructions to install VirtualCom and WinPcap.
4. Once installed, double-click the VCOM shortcut to launch the
application.
5. Click the Search button in the VCOM software window to locate the device.
NOTE: You may receive a rewall notication at this point of the install, please allow
access to this application