Filter
Top Products
Instruction Manual
13
Hardware Flow Control
Set the ow control mode of UART interface as enabled or as none.
UART Memory Overow count
Shows the number of overow bytes in network buer.
UART FIFO Overow count
Shows the number of overows counted in the UART RX buer.
Delimiter
This sets the Character 1 and/or Character 2 to be used as the delimiter. When
sending data from serial to TCP the data is rst stored in the cache. When set, not until
the value of character 1 or 2 is received from the serial side is the data released from
the cache and sent to TCP.
Silent time - If there is no data sent or received for the number of milliseconds
specied the connection is dropped.
The Drop Character drops the delimiter character of the serial port when sending to
TCP, (the receiver doesn't display the character).
Reset Device
Pressing the “Reset” button will force the NETRS2321P to do system reset action.