Filter
Top Products
Remote Proportioning Valve Chapter 4: Installation 14 of 30
Floor-Mount Installation
Use the following procedure to install the RPV using the floor stand: (See Figure 2 for more
information.)
1. Assemble the stand by inserting the standard into the floor plate and tightening the
set screw.
2. Complete the assembly by following steps 3 throuh 6 on page 12.
3. Position the floor stand so the clean-out and inspection hatches are accessible and the
material hoses do not interfere with workspace or create a tripping hazard.
Figure 2: Floor-Mount Configuration